Singapore · Quoted from photos

Marble Etch Repair & Shine Restoration in Singapore

Etch marks are the dull, cloudy rings and spots left when something acidic touches marble: lemon juice, vinegar, soft drinks, sauces, toilet cleaner or the wrong floor cleaner. The acid dissolves a thin layer of the surface. Etching cannot be cleaned off, but it can be honed out and the shine restored.

WhatsApp photos for a price Call +65 9450 9801

Close-up of worn marble with lost shine — Before: shine worn away by foot traffic

What's included

Etch assessment (light etch vs deep etch)
Light etches: polishing compound to restore gloss
Deep etches: diamond honing then polishing
Blending so the area matches the surrounding shine
Advice on safe cleaning products

Signs you need this

Dull rings where glasses or bottles stood
Cloudy patches near the kitchen or bathroom
Dull trails where cleaner was spilled
Spots that feel rough compared to the rest of the marble
Marks that look lighter, not darker

Etch Repair & Shine prices in Singapore

Service	Price (SGD)
Etch mark repair (per spot or area)	Quoted from photos
Vanity / table top shine restoration	Quoted from photos
Whole-floor shine restoration	from $1/sq ft*

*Indicative starting rates. Minimum job charge $350 ($250 for sealing only). Final price depends on the marble type, its condition, how much grinding it needs, the area and access. Spot repairs, vanity tops, bathroom walls and regrouting are quoted from photos. No transport charge within the Downtown Core and CBD. The price we confirm on WhatsApp is the price you pay.

Why marble etches

Marble is calcium carbonate. Acids react with it and dissolve the polished surface, leaving a rough, dull spot. Granite and porcelain do not react this way, which is why a marble top can mark from a squeeze of lemon while the granite kitchen top next to it does not.

Does sealing stop etching?

No. Sealers stop liquids soaking in (stains), but acid still reacts with the surface. The best protection is quick wiping, coasters, and safe cleaning products.

Our process

Check depth by touch and light angle.
Hone deep etches with fine diamond pads.
Polish with marble powder until the gloss returns.
Blend the edges so no patch shows.

Booking wait: Usually 1 to 3 days
Time on site: 30 minutes to 2 hours for spot etches; a full floor or top if etching is widespread

Before we arrive

Clear small items, rugs and fragile decor from the area.
Let us know about any loose, hollow or cracked tiles you have noticed.
Register us with your condo management office or building management and book the service lift.
Keep pets and young children away from the work area.